Back in April I wrote about Microsoft's music store closing, thus rendering any music purchased from that store worthless. Why? The music is DRM infested, and thus will stop playing after they switch off their servers that are needed for license veri... (more in the full post)
So what is this MythTV anyway?
OK so I have already talked here about why I prefer mythtv to MediaPortal, it’s not an exhaustive list but I think it makes a pretty compelling argument for Mythtv. However what makes an even stronger compelling argument for MP is its support for NZ's DVB-T broadcasts, and hence I use it. The latest from the mythtvnz mailing list is that Freeview HD is now working well in myth with the patches from pkendall, so hopefully it is just a case of getting the updates to ffmpeg etc into the main mythtv 'trunk' (is that what it called?) and we will be away!
Anyway I should get to the point of this post. I want to list a couple tips I picked up for improving mythtv here, as I alluded to earlier, myth does require more work than MP or GBPVR but it’s worth it:
1) Adding FM radio. I have no idea why this isn't included by default, it can't be hard and all other major HTPC programs have it. To get it in myth requires a bit of a hack, the setup instructions are here. As they note on the wiki page, it is a hack but looks like a plug-in in the end. It doesn't perform like a plug-in (in terms of sharing the card with recording etc) but it is good enough. Also this page gives an idea to the sort of changes to the menu structure that could be made if so desired.
2) By default myth only allows one job (such as commflagging, or a user job such as a special transcode) at a time. Assuming you are running a somewhat modern processor you can get away with a lot more, especially if you have a dual core. Under the 'general' settings in mythbackend setup, change the max number jobs to say 3 or 4. Also set mythcommflag to begin at the start of the show rather than wait until it has finished.
3) Make sure you enable plugins such as mythmusic, mythvideo and mythweb. If you are using Mythbuntu the Mythbuntu Control Center is the easiest way to change these settings. Mythweb in particular is great, and if you can successfully enable access through your router you can check out your computers status, and create recordings even when you are way from home.
That’s all can think of for now, but there are plenty of other settings worth investigating by hunting through the menus. There are some other good features that I never managed to fully implement, such as http://mythtv.org/wiki/index.php/Mythwelcome and automatic sleep/wakeup.
Next I will spill my thoughts on Media Portal, and the improvements made now we are at RC2.
File format standards getting sorted!
It has taken a flippin long time, but it is good to see these issues sorted/being sorted:
- Adobe PDF ratified by ISO as standard - finally let go of proprietary format last year and put it up for ratification
- Microsoft OOXML ratified by ISO as standard - although the ISO version won't be incorporated until Office 14 comes out next year, and the approval is being challenged by 4 governments . .. .
- ODF being supported by Microsoft - in an Office 2007 Service Pack to be released in 2009
Good article here on Computerworld.
Kerio Teams Up With Habeas Data to Grow Channel Presence in Mexico - CNNMoney.com
Orcon Homehub/ADSL2 Setup - A Quick Review
After going unbundled with Orcon's Gold+ Account I was having issues getting online and was recommended an Orcon HomeHub over D-Link DST-502T. The 502T was theoretically more than capable of doing ADSL2+ (as I was running it at home on the same plan already). But at $5 a month, and to solve a problem I thought, stuff it, and got one sent out.
The HomeHub is really just a Siemens SX-763 WLAN DSL Router. Its running a slightly modified firmware that has the Orcon settings preset. You can't flash newer vesions of Firmware, although Orcon can from their side of things. This could lead to an interesting future for this little hub - more on that later.
The Homehub features (according to Orcon) -
"This sleek wireless router lets you access your Broadband from anywhere in your house without plugs or cables.On the Siemens site it lists it features as -
What's more, because our network can talk to it, our helpdesk can easily support the device remotely to get you back online faster if there is ever a problem.
In the future, we'll be teaching the Homehub some cool new tricks to give you an even better Orcon experience through new and interesting services, so stay tuned..."
- High-speed wireless data transfer at up to 108 Mbps (compatible with IEEE 802.11b/g)
- Integrated ADSL 2+ modem
- 4 Port 10/100 Hub
- External broadband access modem support (e. g. VDSL, cable)
- Support for up to 6 VoIP public telephone accounts (SIP Protocol)
- USB Support (SMB/FTP/Web/Printer).
The Unit is one of the nicer Routers or modems I've seen, although it does feel a but light and plasticy. All the ports are nicely placed on the back. It can be mounted on a wall or look fine on a desk.
The web inerface is pleasent to look at, and functionally seems to include all the settings. There's wizards both for the absolutely basics and also for the security features. Add to that the normal Advanced Settings, It's feature packed but simple to get around. There's support for all the necessary wireless standards - WEP, WPA2-PSK, WPA-PSK or WPA2-PSK/WPA-PSK.
I'd love to go into the VOIP settings but as I have never been too interested in it before, I wouldn't know much. The fact they're there, and are quite feature complete shows a feature I imagine Orcon will use in the future.
Connection wise, the wireless seems solid, although I personally use an Apple Airport Extreme to run a parallel 5ghz Only 11N based network and a 2.4Ghz for older clients. Excessive. Maybe. A bonus of using the $5 a month homehub though.
Internet wise, in the Auckland CBD, just off K Rd I've got a 12286 kbps (upstream) ADSL Connection. Its strange as when the connection was first setup I was getting up to 22500kbps on the connection - close to ADSL2's limit - and now its back down to the top of ADSL1's top....... Orcon?
UPDATE See first comment.
Heres some results from speedtest.net -
Auckland -> Auckland (WorldxChange Communications) - 9907 Down / 354 Up
Auckland -> Christchurch (Snap Internet) - 6587 Down / 266 Up
Auckland -> Sydney (Mammoth Media) - 3327 Down / 333 Up
Auckland -> London (Namesco) - 1723 Down / 180 Up
Auckland -> San Francisco (Unwired) - 2739 Down / 194 Up
Things that aren't cool -
USB only does FTP no SFTP so not great for putting online.
The DHCP server won't list connected devices - Wireless status lists the Host name, Mac and IP's of any wireless clients but for the overall IP's - nothing. The settings are there - just broken, a bug that I hope Orcon will get on to fixing.
UPDATE Orcon do indeed have a forthcoming update. Orcon were nice enough to flash mine and it does indeed fix the issue.
Things that are cool -
USB Features.
Looks good.
A full featured router for only $5 a month (on Orcon).
Assumably VOIP support from Orcon in the future.
The Windows Mojave experiment results
Yesterday I posted about Microsoft Windows Mojave, an experiement in perception.
A set of people were asked what they think is bad on Windows Vista during the Mojave Experiment. Their answers were recorded. They were then shown "Microsoft Windows Mojave", a new operating system that impressed everyone.
Microsoft then revealed "Windows Mojave" and "Windows Vista" are the same one.
I have just found out the full "Mojave Experiment" results will be available 29th July on The Mojave Experiment website.
No comments:
Post a Comment